Honghe Machinery
Honghe Machinery
Explore our elite range of horizontal and vertical processing systems, designed to automate complex drilling, milling, and countersinking operations with micron-level repeatability.
High-pressure abrasive jet system engineered for rapid cutouts in thick architectural glass and stone panels. Ideal for frameless shower doors.
Technical Parameters
Fully enclosed precision machining center utilizing dual-spindle designs for concurrent top-and-bottom drilling with zero runout.
Technical Parameters
All-in-one multi-axis workstation that automates tool changes to perform engraving, edge grinding, milling, and fine polishing in a single cycle.
Technical Parameters
A heavy-duty system optimized for large-scale curtain walls and structural shopfronts, executing high-speed notching and profiling.
Technical ParametersWestern Australia’s construction sector is undergoing a massive paradigm shift. Driven by rigorous thermal performance benchmarks, strict wind-load specifications under AS 1288 (Glass in Buildings), and a severe shortage of skilled trade labor in metropolitan Perth, structural glass fabricators can no longer rely on manual handling. High-performance double-glazed units (IGUs), laminated cyclone-rated panels, and frameless structural balustrades require absolute precision. A variance of even half a millimeter in a bolt-hole cutout can result in catastrophic breakage during tempering or onsite installation.
Nanjing Honghe Glass Machinery Co., Ltd. fills this technical vacuum. By engineering heavy-cast monobloc frames coupled with intelligent double-sided drilling systems, we provide Perth fabricators with a robust alternative to overpriced European platforms. Our machinery drastically reduces cycle times, eliminates edge micro-cracks that compromise glass tempering strength, and ensures that every piece of float, Low-E, or laminated glass complies perfectly with Australian Safety Standards.
Our research and development pipeline focuses on mechanical rigidity, thermal isolation of the spindles, and open-architecture control systems to ensure seamless ERP integration.
Utilizes dual opposing water-cooled spindles to execute drilling from both sides simultaneously. This completely eliminates exit blowouts and micro-fractures in structural glass.
Equipped with absolute encoder motors (Yaskawa/Delta) that maintain tracking accuracy under high loads, compensating instantly for tool drag resistance.
Our frames undergo heavy-duty stress relief annealing and multi-coat epoxy waterproofing, resisting the highly corrosive, saline atmospheres typical of coastal Perth.
Comparing our structural CNC processing models for heavy architectural applications in Perth:
| Feature Spec | Horizontal Processing Center | Vertical CNC Router Series | Waterjet & Milling Hybrid |
|---|---|---|---|
| Max Glass Size | Up to 3000 × 2000 mm (Customizable) | Up to 3300 × 2500 mm | Up to 4000 × 2500 mm |
| Thickness Range | 3 mm – 19 mm (Standard) | 3 mm – 25 mm (Heavy Duty) | 4 mm – 50 mm (Multi-material) |
| Spindle Output | 7.5 kW High-Torque Spindle | 9.5 kW High-Speed electrospindle | Direct Drive Ultra-High Pressure Pump |
| Positioning Precision | ±0.05 mm / meter | ±0.03 mm / meter | ±0.10 mm / meter |
| Lubrication System | Automatic central grease pump | Sealed automated oil mist | Multi-point direct slider lube |
As a leading Chinese glass machinery manufacturer based in the economic hub of Nanjing, Jiangsu Province, we leverage a world-class manufacturing ecosystem. Our factory-direct export model guarantees Perth clients a level of pricing and quality assurance that local fabricators cannot replicate when dealing with middlemen or local Western Australian distributors.
By keeping vital components standard—such as **HIWIN linear guide rails**, **SMC pneumatic controllers**, and **Schneider electric relays**—we ensure that spare parts are easily sourceable off-the-shelf in Perth, preventing prolonged downtime. We handle all export clearances, marine insurance, and container packing procedures to secure transport to Fremantle Port, offering full logistics visibility.
Our CNC machinery is designed to address the specific performance specifications of diverse industries, from high-wind commercial envelopes to safety-critical mining vehicles.
Providing high-end cleaning, drying, and automated milling lines to optimize structural glazing. Perfect for commercial facades along St Georges Terrace and high-rise curtain walls in South Perth.
Intelligent edge grinding and custom cutouts for safety screens. Essential for manufacturing heavy transport windscreens used in Pilbara's demanding mining fleets and local Perth transit authorities.
High-efficiency automated lines optimized for thin solar panel covers. Supporting Western Australia's growing solar energy infrastructure, off-grid microgrids, and remote mining camp installations.
Delivering high-precision processing without damaging delicate soft-coat Low-E reflective layers. Helps local fabricators meet Section J energy efficiency compliance under the BCA (Building Code of Australia).
Edge-deletion, precision notching, and clean wash lines to prepare glass surfaces for ceramic frit digital printing. Perfect for custom commercial signage, architectural artwork, and interior splashbacks.
With Nanjing Honghe Glass Machinery, you benefit from a decade-long track record of quality, backed by practical engineering service solutions.
Every CNC glass drilling center we supply is calibrated to maintain the structural integrity of safety-toughened and laminated glass assemblies. By utilizing controlled ramping speeds and tailored tool geometry, our systems prevent sub-surface micro-cracks that cause spontaneous glass breakage in structural installations.
Whether you are processing panels for pool fencing, commercial shopfronts, or mining control booths, our engineering department ensures the machinery matches the specific processing constraints of AS2208-certified materials.
Through integrated Ethernet interfaces on our CNC machinery controllers, our engineers in Nanjing can perform live remote calibration, update PLC software, and inspect operation logs. This ensures that Perth operators—despite geographic isolation—receive rapid engineering diagnostics within hours, keeping down-time close to zero.
Explore our highly-regarded portable routers, specialized toolsets, and vertical glass machineries engineered for peak durability in Perth shops.
Space-saving vertical format CNC designed to handle large lites up to 2000x3000mm without sagging or glass flexion.
Specs
Ultra-precise toolset containing diamond core drills and counter-sinks optimized for thin automotive glass arrays.
Specs
Vertical routing system delivering continuous operation and clean edge quality for interior partitions.
Specs
Electroplated and metal-bonded diamond drill bits designed to withstand high RPM operations without premature wearing.
Specs
Versatile kit accommodating a variety of core sizes, complete with water feed swivel adapters for cooling.
Specs
High-strength alloy core bits offering clean cutouts in glass, porcelain, and structural ceramic tiles.
Specs
Next-generation diamond cutting blades and drilling templates optimized for hand-held field repairs in WA.
Specs
Automated edge shaping and drilling workstation executing complex glass geometry processing in one continuous load.
SpecsGet technical clarifications regarding the setup, cycle times, power requirements, and operation of CNC glass machinery in WA.
Established in 2008, Nanjing Honghe Glass Machinery Co.,Ltd. is a premier manufacturer integrating the R&D, design, production, sales, and technical service of high-end glass deep processing machinery. Located in the highly-industrialized Qishi Town, Nanjing City, Jiangsu Province, our factory enjoys direct access to China's leading mechanical engineering hubs, component suppliers, and global shipping ports.
Over the past 15 years, Honghe has secured numerous national invention patents and independent intellectual property rights. By continually reinvesting in CAD design technologies and multi-axis tooling centers, we deliver durable, industrial-grade glass machinery that competes directly with European platforms, offering reliable, factory-direct performance to fabricators worldwide.